Tuesday, June 8, 2010

Commodore 64

Commodore 64
This is my Commodore 64 mod that I've been working on for the last few months. I built this machine to be used as a synthesizer which to run 8bit adventures MSSIAH from Sweden. I installed a sid2sid board with 2 new old stock sid 6581 chips that I got from Australia.

I repainted the machine black with the key bed white. I wanted to also repaint the keys, but I could not find a way other that stickers to get the letters back on, so I kept the keys original. I added the 4 pot mod as well as switches to deactivate the pots making ports 1 and 2 still usable for game pads. Basically the four pot mod is taking the y axis and x axis from the game ports and installing it into the machine. I also added indicator lights to the switches to let me know when they are activated. The other two pots on the left hand side is the feedback distortion loop mod, with switches and indicator lights as well.

Added 1/4 inch outputs and inputs, both with volume control. I added a custom 3.5 inch lcd screen with second input available via rca on the back. The screen is a back up monitor for a vehicle, I was able to get this lcd for only $30 including shipping from China. The screen though takes 12 volts of power, so I added a second input for a 12 volt 1 amp power supply on the back. This way the mods get there power with out tapping the c64s power. I also added a dimmer switch to the leds so that I can control the voltage they receive thus dimming the lights.

No comments:

Post a Comment